Rice Lake 480 Legend Series Digital Weight Indicator Installation Manual - Manual (Page 6)

2 480 Operator’s Manual
1.0 Introduction
The 480 is a single-channel digital weight indicator housed in a NEMA 4X/IP66-rated stainless steel enclosure.
The indicator front panel consists of a large (.8 in, 20 mm), six-digit, seven-segment LED display and
seven- button keypad.
Features
• Auto switching AC power supply 115 VAC to 230 VAC, 50-60 Hz.
• Drives up to ten 350
or twenty 700 load cells.
• Supports four and six wire load cell connections.
• Two communications ports with Demand or Continuous outputs.
• Optional analog output module provides 0–10/2-10 VDC or 0–20/4–20 mA tracking of gross or net weight
values.
• Optional digital I/O card, four outputs/two inputs for setpoints and key functions.
• Unit ID up to six numeric, operator entered.
• Accumulator with report and clear.
• Time and date.
• Audit trail tracking.
Supported Applications
• Custom Ticket Printing: Gross, Net & Setpoint format can be customized up to 300 characters and print
Time and Date, Unit ID, and Consecutive Ticket Number.
• Basic Weighing: Gross or net mode with operator menu to other functions.
• Accumulation: Weights are totaled, with armed print function.
• Batching: Up to eight batch steps with latched or continuous outputs for Gross, Net, Delay setpoint.
Actions include trip high or low, wait for standstill, print, accumulate and tare.
• Keyed Tare: Preset tare value can be entered when the gross weight is at zero.
• Local/Remote: Remote unit displays weight and transmits key press commands to the local unit.