Rice Lake Explorer Series Toploader, Ohaus - Manual (Page 109)

EXPLORER BALANCES EN-107
5.14 Lockout
Use this menu to prevent unauthorized changes to menu settings. When the menu is locked and the
security switch is set to ON, the locked menus can be viewed but not changed. Factory default settings
are shown in bold.
5.14.1 Lockout Sub-menu
Calibration
Lockout
User Settings
Lockout
Balance Setup
Lockout
Application
Modes Lockout
Weighing Units
Lockout
GLP and GMP
Data Lockout
Communication
Lockout
Library
Lockout
I/O Settings
Lockout
Factory Reset
Lockout
5.14.2 Lock Calibration
Set the status.
OFF = the Calibration menu is not locked.
ON = the Calibration menu is locked.
5.14.3 Lock User Settings
Set the status.
OFF = the User Settings menu is not locked.
ON = the User Settings menu is locked.
5.14.4 Lock Balance Setup
Set the status.
OFF = the Balance Setup menu is not locked.
ON = the Balance Setup menu is locked.
5.14.5 Lock Application Modes
Set the status.
OFF = the Applications menu is not locked.
ON = the Applications menu is locked.
5.14.6 Lock Weighing Units
Set the status.
OFF = the Units menu is not locked.
ON = the Units menu is locked.
5.14.7 Lock GLP and GMP Data
Set the status.
OFF = the GLP and GMP Data menu is not locked.
ON = the GLP and GMP Data menu is locked.