Rice Lake Explorer Series Toploader, Ohaus - Manual (Page 87)

EXPLORER BALANCES EN-85
4.15 Statistics
Statistics are used to compare a number of samples and examine the relative deviation of the samples along with
other statistical data. A minimum of three samples is required.
Statistics can operate manually (key press after each step) or automatically (weights automatically recorded
when stable). To use the statistics feature, enable it in the Application Setup menu.
This feature is available in Weighing, Counting, Check Weighing, Dynamic Weighing and Filling applications.
4.16 Library
When an item is processed on a regular basis, the item’s data may be stored in memory for future use. This
memory is referred to as the Balance’s Library.
The following data is stored for the Application used:
Application
Parameters
and setups Name
Preset
Tare APW
Ref Wt.
or Target
Sample
size
Under
Limit
Over
Limit Level Mode
Weighing x x x
Counting x x x x x x x x
Percent Weighing x x x x
Check Weighing x x x x x x
Dynamic Weighing x x x x
Filling x x x x
Totalization N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
Formulation N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
Differential Weighing N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
Density Determination x x x
Peak Hold N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
Ingredient Costing N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
Pipette Adjustment x x x
SQC x x x
4.16.1 Creating a Library Record
To create a Library record, the Settings screen is used. From the home screen, touch the Edit Settings button.
The Settings screen is now displayed.
Touch the Edit
Settings button.
The Settings
screen appears.
Confirm the
application settings;
then touch Save
(the diskette,
top-right).
An alphanumeric
entry screen
appears, to enter
the Library Record
name.