Rice Lake Explorer Series Toploader, Ohaus - Manual (Page 30)

EN-28 EXPLORER BALANCES
The buttons for APW, Samples and Target show default
(or previously set) values. To change values, touch the button.
A keyboard screen appears.
Key in the new value, and press Done.
To set a new average piece weight, press Recalculate APW.
A new screen appears saying:
Place 10 pieces. Press Accept
After following these instructions, and setting all values as
desired, press Return to Application.
4.2.5 Statistics for Parts Counting
Use the Statistics function to compare a number of samples and examine the relative deviation of the samples
along with other statistical data. A minimum of three samples is required.
Statistics can be determined manually (Manual mode, with key press after each step) or automatically (Auto
Mode: weights are automatically recorded when stable). To use the statistics function, enable it first in the
Application Setup menu.
Application Setup
First, Enable Statistics
Touch the Setup
Icon wrench (as
above) to enter
Setup menu.
Press Statistics and choose either Manual or Automatic, then press Close.
Press Done on the main options menu to return to the home screen.