Rice Lake Explorer Series Toploader, Ohaus - Manual (Page 53)

EXPLORER BALANCES EN-51
4.7.3 Totalization – Automatic
The weight of the item is added automatically (when stable).
To enable this feature:
1. Touch the Setup Icon (wrench) to enter Application Setup.
2. Press Auto Sample to turn this feature On.
Clear the pan (if necessary). Add a new sample.
The item weight is shown on the Main Display Line.
The weight of the item is automatically added (when stable) to the
total. The new total is shown on the Second Display Line.
Remove the item from the weighing pan, then add the next item
and continue the same as in manual mode.
When finished, press the Clear Total button to reset the
Second Display line to zero.