Rice Lake Explorer Series Toploader, Ohaus - Manual (Page 97)

EXPLORER BALANCES EN-95
5.5.5 Auto Tare
Set the automatic Tare.
OFF = disabled.
ON = enabled.
5.5.6 Gross Indicator
Set the symbol displayed for gross weights.
OFF = no symbol is displayed.
GROSS = the G symbol is displayed.
BRUTTO = the B symbol is displayed.
5.5.7 Legal For Trade
Use this menu to set the Legal for Trade status.
OFF = standard operation.
ON = operation complies with Weights and Measures regulations.
Note: When Legal for Trade is set to ON, the menu settings are affected as follows:
Calibration Menu:
AutoCal internal Calibration is forced to ON and hidden. Automatic Calibration, and
Calibration Test functions are available. All other functions are hidden.
Balance Setup Menu:
Stability Indicator Range is locked at 1 Division.
Auto Zero Tracking is limited to 0.5 Division and OFF.
Auto Tare and Gross Indicator are locked at their current setting.
Graduations is forced to 1 Division and the menu item is hidden.
Weighing Units menu: all units are locked at their current settings.
Communication Menu:
Stable Weight Only is locked ON.
Numeric Value Only is locked OFF.
Auto print mode selections are limited to OFF, On Stability, and Interval.
Continuous is not available.
Note: The security switch under the Base must be in the locked position to set Legal
for Trade to ON. The security switch must be in the unlocked position to set Legal for
Trade to OFF. See Section 6.
5.5.8 Graduations
Set the displayed readability of the balance.
1 Division = standard readability.
10 Divisions = readability is increased by a factor of 10.
For example, if the standard readability is 0.01g, selecting 10 Divisions will result in a
displayed reading of 0.1g.
5.5.9 Date & Time
Set the current Date and Time.
Change the format (if desired),
then enter the current value.
Select 9 to return to the sub-menu.