Rice Lake Explorer Series Toploader, Ohaus - Manual (Page 33)

EXPLORER BALANCES EN-31
Establishing a Reference Weight
There are two methods to establish the Reference Weight value:
1. Direct: If the actual Reference Weight is known, it can be entered directly;
2. Derived: The sample’s weight can be used to establish the reference weight.
Establishing a Known Reference Weight
The current
Reference
weight value is
shown on the
Settings screen.
To adjust the
Reference
weight directly,
touch the
Reference
button.
A numeric input
window appears.
Key in the desired Reference Weight, then press 9.
The display returns to the previous screen with the new value highlighted.
To return to the Percent Weighing home screen, touch Return to Application.
Using a Sample to Establish a Derived Reference Weight
To establish a
new Reference
weight value,
touch the
Recalculate
Reference
button.
The New
Reference
screen appears.
Follow the
screen
instructions to
establish a new
Reference
Weight.
Actions available: Tare, Cancel, or Accept.
Press Accept to capture the value and return to the Settings screen.
The display returns to the Settings screen with the new Reference weight value highlighted momentarily.
To return to the Percent weighing home screen, touch Return to Application.