Rice Lake Explorer Series Toploader, Ohaus - Manual (Page 37)

EXPLORER BALANCES EN-35
4.4.3 Application Setup
The Application can be customized for various user preferences.
Touch the Setup Icon (wrench) to enter the Application Setup
from the home screen:
The Setup Menu is now displayed.
Select the list item to view or change the setting as
desired.
To return to the Application home screen, touch Done.
Check Weighing Application Setups (defaults in Bold)
Item Available Settings Comments
Enabled On, Off Turns Application on/off
Limits Setting Mode Over and Under,
Nominal/Weight Tol,
Nominal/Percent Tol. To select the Mode
Secondary Unit On, Off To show the Second Display line
Audible Signal On, Off Beeps if reading is under or over.
Statistics Off, Manual, Auto
Display Setting Weight,
Check Status To show Weight or Check Status
on Main Display Line
Lock Settings On, Off Press to lock the current setting(s)
so they cannot be changed.
Reference fields
Over Limit On, Off Over weight limit
Under Limit On, Off Over weight limit
Gross On, Off Gross weight is displayed
Net On, Off Net weight is displayed
Tare On, Off Tare weight is displayed
Target On, Off Used for Nominal Checkweigh
Positive Tolerance On, Off Used for Nominal Checkweigh
Negative Tolerance On, Off Used for Nominal Checkweigh
Print Options See Printing Section.
Over Limit On, Off
Under Limit On, Off
Target On, Off Used for Nominal Checkweigh
Positive Tolerance On, Off Used for Nominal Checkweigh
Negative Tolerance On, Off Used for Nominal Checkweigh