Rice Lake MSI4300 PortaWeigh Plus Crane Scale 7 Key - Manual (Page 14)

MSI-4300 Porta-Weigh Plus/7 Key • User Guide Page 13
M E A S U R E M E N T S Y S T E M S I N T E R N A T I O N A L
appear to reflect a display overflow. If you have a printer
option, the larger numbers can be printed through the use of
the PRINT button on the Remote, or with a computer
hookup.
Action:
Push TOTAL
The current weight is added to the total register. The total weight
along with the number of weighments is displayed briefly on the LCD.
(See VIEW TOTAL)
• Weight greater than 2% of full scale or “Min e” whichever is
greater (settable parameter-contact factory) :
Add the current reading (relative to the tared zero or Gross
zero depending on mode) to the contents of the accumulate
register.
• When a valid value is added, the display gives an indication
of the new total and how many weighments have been
totaled. i.e. 1 TOTAL , 2 TOTAL , 3 TOTAL, ...x TOTAL.
The Total accepted LED (center right of display) will also
light for 4 seconds providing additional indication that the
Total command was accepted.
To Clear the total:
Press VIEW
∑
, SHIFT & CLEAR .
Press VIEW
∑
to exit View Total.
Auto Total:
Setup Option:
Allows for auto accumulate. When a weight threshold of 2% of full
scale or “Min e” (whichever is greater) above Net Zero or Gross Zero
is exceeded the accumulate function operates automatically. The
displayed weight is added to the accumulated value in the Total
Register only when the weight returns to zero (0
±
1% of full scale).
When a weight that meets the minimum accept limit, settles (no
motion), the Total LED indicator will flash three times. If the weight
changes to a new settled value the LED will flash again indicating that