Rice Lake MSI4300 PortaWeigh Plus Crane Scale 7 Key - Manual (Page 42)

MSI-4300 Porta-Weigh Plus/7 Key • User Guide Page 41
M E A S U R E M E N T S Y S T E M S I N T E R N A T I O N A L
ID Number:
Up to 9 separate ID codes are available. Each ID code has a total
register, and a tare register. Weighing setups can be prearranged by
setting the ID number and establishing a Tare Memory for that ID
number. Then the next time that particular ID number is selected the
proper tare value is already established, and any previously stored
total value is enabled.
Action:
The ID number is changed by pushing “ID NUMBER” and then the
desired number (1-9). The default ID number is 1 which is the only
available ID without the remote.
Printing:
Pushing the Print key on the remote will cause the current displayed
value to be printed (requires EIA-232 option).
Action:
• To print the Gross, Net or Total values, first use the NET/
GROSS key or the VIEW
∑
key to place the desired mode on
the display, then push PRINT.
• To print the Tare value: While in NET mode push TARE
followed by PRINT.
Caution: Do not accidently push the Tare key while in Gross mode as
this will clear the old tare and establish a new tare.
Numeric Entry
The Tare memory values and Setpoint values can be directly entered
from the remote. Instead of using the select key to scroll through
values, push the desired number directly. The Tare memory number
can also be accessed directly. (i.e. SHIFT - TARE - 3 will directly
select Tare memory #3).
REMOTE CONTROL BATTERY REPLACEMENT
Type:
Standard 9 volt (NEDA/ANSI 1604 A, IEC 6LR61). alkaline type is
preferred due to high LED peak currents. There is storage space for a
spare battery internal to the remote.