Rice Lake MSI4300 PortaWeigh Plus Crane Scale 7 Key - Manual (Page 22)

MSI-4300 Porta-Weigh Plus/7 Key • User Guide Page 21
M E A S U R E M E N T S Y S T E M S I N T E R N A T I O N A L
nently disabled (OFF mode).
To change the Backlight Mode:
1) Push SHIFT SETUP (unless you are already in the Setup
Menu).
2) Push SELECT until the message display reads "LIGHTING".
3) Push ENTER. You are now in the (Back) Lighting menu.
4) Push SELECT to change between "AUTO" (Automatic light
sensing mode), "ON" (always on) (Warning: drains batteries
at a higher rate) or "OFF". When the desired mode is
displayed on the message display, push ENTER .
5) Now you are back in the Setup Menu. Push CLEAR to go
back to normal operation or push SELECT to scroll to a
different setup operation.
CONTRAST
Used to optimize the contrast of the liquid crystal display at various
viewing angles. This is factory preset for optimal viewing from below
the scale. By accomplishing eight steps, the viewing angle can be
changed slightly to improve the contrast for other visual applications.
To change the Display Contrast:
1) Push SHIFT SETUP (unless you are already in the Setup
Menu).
2) Push SELECT until the message display reads "CON-
TRAST".
3) Push ENTER . You are now in the contrast setting mode.
4) Push SELECT repeatedly to change the message display
contrast. There are eight steps. When the desired contrast
setting is reached, push ENTER .
5) Now you are back in the Setup Menu. Push CLEAR to go
back to normal operation or push SELECT to scroll to a
different setup operation.