Rice Lake MSI4300 PortaWeigh Plus Crane Scale 7 Key User Manual
Page 44
MSI-4300 Porta-Weigh Plus/7 Key
•
User Guide Page 43
M E A S U R E M E N T S Y S T E M S I N T E R N A T I O N A L
•
The range of the remote is optimized when the scale is 8 feet
or more off the ground. The infrared sensor is aimed slightly
down to help diminish sunlight overload. When the scale is
closer to the ground, aim the remote up into the infrared
window from below. If the scale is used normally very low to
the ground it is sometimes possible to bounce the infrared
signal off the ground and up into the sensor.
•
Using SHIFT key functions requires that the keys are entered
in rapid fashion. If more than five seconds pass between the
SHIFT key and subsequent key presses, the scale will forget
that you pushed SHIFT. This could mean, for example, that
the scale will turn off rather than go into the test function
(Shift, Power).
•
The ID# function has a five second maximum window for the
number entry otherwise the ID# will remain as before.
•
As shipped, any Measurement Systems International infrared
remote will operate any Porta-Weigh Plus. It is possible, by
special order, to encode the infrared transmissions so that a
separate remote is required for each different Porta-Weigh
Plus. Up to eight channels are possible. Contact the factory
for more details.