Rice Lake MSI-4260 Port-A-Weigh - Manual (Page 24)

20 MSI-4260 Port-A-Weigh Operator’s Manual
LEARN
Used for programming the RF Remote Control. This function is detailed in Section
6.0.
PEAK HOLD
Peak Hold will only update the display when a higher peak weight reading is
established.
The Peak Hold function uses a high speed mode of the A/D converter allowing it to
capture transient weights at a far higher rate than typical scales. Peak hold is cleared
and re-enabled with the USER key.
PEAK HOLD is not available on NTEP or OIML LFT certified scales.
UNIT
The Function key will switch the weight units between pounds and kilograms.
UNIT switching is not available on OIML certified LFT scales.