Rice Lake MSI-4260 Port-A-Weigh - Manual (Page 56)

11) The current RF Channel
number is displayed.
If the offered RF Channel value is
correct, push TARE and jump to
step 14.

blinking
12) Press USER and using
the previous process,
enter the RF Channel
number.
Recommended RF Channel numbers
range from 12 to 23. In this example
we’ll use 21 as the RF Channel.
13) When the desired RF
Channel number is
shown and fixed, press
TARE .
14) The next RF Setup Menu
item is the “nEtid”
(Network ID). Press
TARE to see the current
Net ID number.
If the offered Network ID value is
correct, push TARE and jump to
step 17.
15) Using the numeric entry
process as before, input
a network ID number.
Press
F2 to start a new
number.
Allowed Network ID numbers range
from 0 to 99999. MSI recommends
a random number of at least four
digits to ensure that the 8000
system won’t conflict with any
other 802.11.4 networks (Zigbee).
16) When the final number is
shown and fixed, press
TARE to store the
Network ID.
17) The RF Setup Menu goes
to the first menu, “OnOff”.
Press the
ZERO key to
exit out of the RF Setup
Menus.
18) Press ZERO again to exit
the COMM Setup Menu
and store the new RF
Network numbers.
QHWLG

 
blinking
blinking fixed

blinking
3ULQW

blinking

fixed

current Net ID blinking

blinking
6WRUH
 
example value only
2Q2II
USER
F
USER
F
TARE
T
USER
F
USER
F
TARE
T
TARE
T
TARE
T
TARE
T
ZERO
O
sto
ZERO
O
sto
USER
F
Repeat number
entry procedure
52 MSI-4260 Port-A-Weigh Operator’s Manual
Figure 7-6. RF Setup Menu (continued)