Rice Lake MSI-4260 Port-A-Weigh - Manual (Page 27)

Set Up 23
4.3 Auto- Off
The Auto-Off feature, when enabled, prolongs the battery life of the scale by turning
POWER off when the scale is not in use. Any time a button is depressed (any button),
or the detected weight is in Motion exceeding 5 or 10d, the time limit is reset.
Therefore, the scale will stay on indefinitely if the weight is changing or any button is
pressed at least once. With Auto-Off disabled, the scale will remain on; only pressing
POWER will turn it off (or if the battery is depleted).
1) With the 4260 off, press and hold
the USER key, then press the
POWER key.
...or while the 4260 is on, press USER
and POWER simultaneously.
2) The first item of the Setup Menu
is “Func1”. Scroll to “A-OFF” with
the
USER key.
3) To setup the A-Off timing, press
TARE . The current Auto-Off time
is displayed.
4) Select the Auto Off time by
scrolling through the choices with
the
USER key.
In this example, we’ll set 60 minutes as
the Auto-Off time.
5) When the desired time is
displayed, press TARE . The next
item in the Setup Menu appears.
6) Either press ZERO to exit Setup
and store all changes, or
continue to another Setup Menu
item using the
USER Key.
Auto-Off Setup
)YQF

6/((3
Next Setup Menu Item
2II
blinking



blinking
blinking
blinking
blinking
$2))
Store and return to
weight display
6WRUH
Hold
USER
F
esc
POWER
USER
F
USER
F
USER
F
USER
F
USER
F
USER
F
TARE
T
TARE
T
ZERO
O
sto
Cancel all setup
changes
esc
POWER
Figure 4-3. Auto-Off