Rice Lake MSI-4260 Port-A-Weigh - Manual (Page 28)

24 MSI-4260 Port-A-Weigh Operator’s Manual
4.4 Sleep
The SLEEP feature reduces power consumption by automatically turning off the
display during periods of inactivity. While in the Sleep Mode, the Green
Acknowledge annunciator will blink at a 1s rate to indicate the MSI-4260 is in sleep
mode. To wake up either a button must be pushed (front panel or RF remote), or the
weight must change by 5 d or more.
1) With the 4260 off, press and hold
the USER key, then press the
POWER key.
...or while the 4260 is on, press USER
and POWER simultaneously.
2) The first item of the Setup Menu
is “Func1”. Scroll to “Sleep” with
the
USER key.
3) To setup the Sleep timing, press
TARE . The current Auto-Off time
is displayed.
4) Select the Sleep start time by
scrolling through the choices with
the
USER key.
In this example, we’ll set 30 minutes as
the Sleep start time.
5) When the desired time is
displayed, press TARE . The next
item in the Setup Menu appears.
6) Either press ZERO to exit Setup
and store all changes, or
continue to another Setup Menu
item using the
USER Key.
Sleep Setup
)YQF

GLVS/
Next Setup Menu Item
2II
blinking

Store and return to
weight display

blinking
blinking
blinking
6/((3
6WRUH
Hold
USER
F
esc
POWER
USER
F
USER
F
USER
F
USER
F
USER
F
TARE
T
TARE
T
ZERO
O
sto
Note
SLEEP must be set to less time than the Auto-Off timer.
For example, set SLEEP to five minutes and Auto-Off to 30 minutes.
Figure 4-4. Sleep Setup