0 options, 1 heater kit installation, Warning – Rice Lake SURVIVOR SST3 Washdown Printer User Manual
Page 30
Options
27
5.0
Options
The following option is available with the SST3 printer.
•
SST3 Printer Heater Kit, PN 111121
•
SST3 Wireless Antenna Kit, PN 114543
5.1
Heater Kit Installation
Installation of the optional heater kit requires work inside the printer enclosure. This procedure is to
be performed by qualified service personnel only.
Figure 5-1. SST3 Printer Heater Kit
The Hoffman heater is designed to protect labels, sensitive mechanical, electrical and electronic equipment from
the harmful effects of condensation, corrosion from condensation, and low temperatures. Thermostatically
controlled, the fan-driven heater maintains a stable temperature within the enclosure to allow component parts to
perform reliably over a longer period of time.
Whether installing the heater for the first time or replacing the unit, there are several steps involved with the
installation.
The heater kit should be mounted to the enclosure panel using existing studs in the area indicated in Figure 5-2.
Figure 5-2. Hoffman Heater Location
Warning
Heater Location within
t h e S S T 3 p r i n t e r
enclosure
This stud is shared with the cove
r
See Figure 5-5 for the second
mounting stud location