Rice Lake SURVIVOR SST3 Washdown Printer User Manual
Page 33
Advertising
30
SST3 Installation Manual
6. Remove the terminal strip nuts that are holding down the clear terminal strip cover using a 5/16” socket.
Set the clear plastic terminal strip cover aside and ensure that the plastic spacers do not get lost (shown in
Figure 5-9).
Figure 5-8. Terminal Strip Location, Wiring, and Clear Cover
7. Using a phillips head screwdriver, remove the three open terminal screws located on the terminal block.
Figure 5-9. Remove Open Terminal Screws
Plastic spacers x 2
Advertising