Rice Lake SURVIVOR SST3 Washdown Printer - Manual (Page 38)

Options 35
5.2.1 Prepare the Printer
1. Touch a bare metal part of the printer frame to dissipate any static electricity that may be present.
2. Turn the printer off and unplug from the outlet.
3. Unlatch the SST3 hinges.
4. Remove screws from the printer enclosure (6 total)
5. Remove the metal cover which houses the CPU board.
Figure 5-20. Remove Screws from Enclosure
6. Remove the two screws and the cover plate from the rear of the printer using a #2 Phillips head
screwdriver or a 9/32” socket.
Figure 5-21. Remove Screws from Cover Plate