Rice Lake SCT-10 - Manual (Page 35)

Configuration 31
2.9.3 Keypad Or Display Locking
1. Press immediately followed by , hold them down for about 5
seconds (this operation is also possible via the MODBUS and ASCII
protocols):
2. Press or until desired parameter is displayed, press .
Parameter Description
FrEE
no lock
KEY
keypad lock: if active, when key is pressed the message bLOC is
displayed.
dI SP
Keypad and Display lock: if active, the keypad is locked and the
display shows the instrument model (weight is not displayed); by
pressing a key the display shows bLOC for 3 seconds.
0
ESC PRINT
TARE MENU