Rice Lake SCT-10 User Manual
Page 43
Operation 39
The output status can be read at any time but can be set (written)
only if the output has been set as or (see Section 2.6 “Outputs And
Inputs Configuration” on page 26); otherwise, the outputs will be
managed according to the current weight status with respect to
the relevant setpoints.
Divisions And Units Measure Registry (40014)
This register contains the current setting of the divisions (parameter dI UI S ) and
of the units of measure (UnI t parameter).
Use this register together with the Coefficient registers to calculate the value
displayed by the instrument.
Inputs Register (40025)
(Read Only)
Outputs Register (40026)
(Read And Write)
Bit 0
INPUT 1 Status
Bit 0
OUTPUT 1 Status
Bit 1
INPUT 2 Status
Bit 1
OUTPUT 2 Status
Bit 2
Bit 2
Bit 3
Bit 3
Bit 4
Bit 4
Bit 5
Bit 5
Bit 6
Bit 6
Bit 7
Bit 7
Bit 8
Bit 8
Bit 9
Bit 9
Bit 10
Bit 10
Bit 11
Bit 11
Bit 12
Bit 12
Bit 13
Bit 13
Bit 14
Bit 14
Bit 15
Bit 15
H Byte
L Byte
Units of measure
division
Note