Torbal AGN100 - Manual (Page 16)

- 15 -
8.1.1. Weighing
1. To configure the Weighing Function use the navigation keys to select “Weighing” in “Mode Setup”
and press ENTER. The status and available weighing options will be displayed. If the function is
currently in use the status will be set to “ON”.
2. To assign a “Quick Key” use the navigation keys to select “Quick Key” and press the ENTER key.
Use the navigation keys to select a desired quick key (F1 through F5). Once the desired key is selected
press the ENTER key to accept the selection.
If the key is not available (used by a different function) a warning message will be displayed
“Warning Quick Key Already In Use!”
To override the key press ENTER. To abort and select a
different function key press the CLR key.
3. To exit the Weighing set up select “Exit” and press the ENTER key.