Torbal AGN100 - Manual (Page 22)

- 21 -
8.1.5. Totalizing
1. To configure the Totalizing Function, use the navigation keys to select “Totalizing” in “Mode Setup”
and press ENTER. The status and available Totalizing options will be displayed. If the function is
currently in use the status will be set to “ON”.
2. To select an operating mode use the navigation keys to select “MODE” and press ENTER. By default
Totalizing is set to “Auto” (Automatic). To operate Totalizing in manual use the navigation keys to
select “Manual” and press ENTER.
Totalizing Operating Modes
Automatic Totalizing and Adding :
Automatic
When set to Automatic, the scale will automatically
add the first stable weight reading to the total.
Manual Totalizing and Adding : Manual When set to Manual each weigh has to be manually
added to the total by pressing a designated key.
3. To assign a “Quick Key” use the navigation keys to select “Quick Key” and press the ENTER key.
Use the navigation keys to select a desired quick key (F1 through F5). Once the desired key is selected
press the ENTER key to accept the selection.
If the key is not available (used by a different function) a warning message will be displayed
“Warning Quick Key Already In Use!”
To override the key press ENTER. To abort and select a
different function key press the CLR key.