Torbal AGN100 - Manual (Page 59)

- 58 -
2. After performing a tare place the first object on the pan.
Automatic : When set to “Automatic” the weight of the object will be added automatically. Once the
weight stabilizes, command “ITEM 00X” will appear on the display signaling that the weight has been
added to the grand total.
Note: In the automatic mode the minimum weighing mass must be equal to or greater than 10d. To see
this limit expressed in grams see specifications.
Manual : When set to “Manual” the weight of the object must be added manually. Once the weight
stabilizes and the stability indicator appears on the display press the ENTER key to add the weight to the
grand total. Upon pressing ENTER command “ITEM 00X” will appear on the display signaling that the
weight has been added to the grand total.
3. Once the weight has been added to the total you can remove the object from the pan and perform a tare
if necessary.
4. Steps one through three can be repeated to add more weighing results to the grand total.
5. To view an itemized (Total Report) press the FUNCTION key.
6. To print the report press F1. To clear and cancel Totalizing press F3. To continue Totalizing press F5.
7. To cancel and start a new totalizing transaction presses the CLR key.
Caution : Pressing F3 will cancel and clear all items and totals.