Torbal AGN100 - Manual (Page 39)

- 38 -
2. Windows will begin installation of the driver, when completed click “Finish”.
3. Once installation of the driver has been completed the scale is ready to communicate with the PC via
the USB port.
8.3.7. Time and Date Adjustment
1. From the Configuration Menu select “Time and Date Adjustment” and press ENTER key.
2. To adjust the time use the navigation keys to select “Time” and press ENTER.
3. Use the yellow keys to enter the current time.
4. The time is entered in segments: Hours, Minutes, and Seconds. After entering a segment press the
ENTER key to move to the next segment.