Torbal AGN100 - Manual (Page 51)

- 50 -
3. If required, place a container on the pan and press the “T” key to tare.
4. After tarring the container the scale will display “Sample On” indicating to weigh the sample.
Manually count out the sample size which was selected in mode set up and place it in the container
located on the pan.
The required sample size is also indicated in the upper left corner of the display (the SPL value).
5. The weight of the sample will be displayed as it is placed on the pan.
6. Once the weight of the sample stabilizes and the stability indicator appears on the display press the
ENTER key to confirm the sample weight.