Torbal AGN100 - Manual (Page 37)

- 36 -
8.3.5. RS232
1. From the Configuration Menu select RS-232C and press the ENTER key.
2. To configure the RS232 Port use the navigation keys to select a desired parameter and press the
ENTER key.
3. Use the navigation keys to make the desired selection and press the ENTER key to save the setting.
8.3.6. USB Configuration
1. From the Configuration Menu select USB and press the ENTER key.
2. To configure the USB Port use the navigation keys to select a desired parameter and press the
ENTER key.
3. Use the navigation keys to make the desired selection and press the ENTER key to save the
setting.