Torbal AGN100 - Manual (Page 67)

- 66 -
Note: Exiting the report will clear all data.
9.10.1. Storing a limit set into the scale’s database
1. Press the FUNCTION key to access the limit set database.
2. Use the navigation keys to select an “Empty Slot” into which the limit set will be saved.
3. Press the right navigation key. Available limit set fields will be displayed.
4. Use the navigation keys to select a desired field. Once the field is selected press the ENTER key and
assign the desired criteria.
5. After assigning the limit set, select “Exit” and press the ENTER key to accept and save the set.