Torbal AGN100 - Manual (Page 27)

- 26 -
3. To assign a default weighing time that will be used in calculating the weight dynamically, use the
navigation keys to select “Time” and press ENTER. To select a “Preset Time” use the navigation
keys to toggle until a desired Time is displayed (3sec., 5sec., 10sec., 15sec.). To assign a custom time
use the number keys on the scale’s keypad to key in a desired value. Once the desired time is selected
or entered, press the ENTER key to set and confirm the selection.
4. To assign a Quick Key to use the navigation keys to select “Quick Key” and press the ENTER key.
Use the navigation keys to select a desired quick key (F1 through F5). Once the desired key is selected
press the ENTER key to accept the selection.
If the key is not available (used by a different function) a warning message will be displayed
“Warning Quick Key Already In Use!”
To override the key press ENTER. To abort and select a
different function key press the CLR key.
5. To configure the scale’s display during Animal Weighing use the navigation keys to select “Display
Setup” and press the ENTER key. To disable information from displaying during the function use the
navigation keys to highlight the desired selection and press the ENTER key to remove the check mark.
Once the check mark has been removed the information will not display while performing animal
weighing.
6. To exit Animal Weighing set-up use the navigation keys to select “Exit” and press ENTER.