Torbal AGN100 - Manual (Page 8)

- 7 -
Key Primary Function
Secondary
Function
Power On and Power Off -
Tare – used to tare the weighing pan N/A
0 
Zero – used to zero the scale (Legal for Trade models only) N/A
Enter – used to accept and confirm commands N/A
MENU
Menu – used to access the main menu Number “9” key
CLR
Clear – used to clear and cancel operation N/A
▲▼◄►
Navigation Keys – used to navigate through the menus and functions N/A
Function Key – used access database and secondary function Number “0” key
Data Transfer – used to print data or transfer data to a PC via the RS232
communication port
Number “7” key
▼
Calibration Key - used to initialize internal calibration Number “8” key
F1
Function Key Number “1” key
F2
Function Key Number “2” key
F3
Function Key Number “3” key
F4
Function Key Number “4” key
F5
Function Key Number “5” key
Display Indicator Description
Stability Indicator - The weighing result has stabilized and an accurate reading may be taken.
Zero - The scale is maintaining a “center of zero” condition. (Legal for Trade models only)
AUT AZSM (Automatic Zero Setting Mechanism) is enabled. Always enabled in Legal for Trade models.
OFF Power Off - The scale is turned OFF and in standby mode.
Diff. Difference
SPL / SAPL Sample or Samples
LOCK Display Locked
PCS Parts Counting
CHKC Check Counting
PERC Percent Weighing
TOT Totalizing
COMP Compounding
CHKW Check Weighing
ANL Animal Weighing
HLD Display Hold
SQC SQC Process control
Chapter 3: Keys, Display Indicators and Abbreviations