Torbal AGN100 - Manual (Page 3)

- 2 -
9.1.2. Clearing a Tare………………………...……………………………………………..43
9.2. Parts Counting…………………………………………………………..…….…………. 44
9.2.1. Automatic………………………………………………………………...…………..44
9.2.1.1 Counting Parts for the First time…………..……………………………….…… 44
9.2.1.2 Counting Parts which Have Been Previously Stored in the Scale’s Database…… 46
9.2.2. Manual………………………………………………………………….………….. 48
9.3. Check Counting……………………………………………………………………………49
9.3.1. Storing a Limit Set into the Scale’s Database……………...……………………..….52
9.4. Percent Weighing…...……………….…………………………………………………….52
9.4.1. Automatic…………….………………………………………………………………52
9.4.1.1 Percent Weighing for the First Time……………………………………………. 52
9.4.1.2 Percent Weighing with Stored Reference Weights………………….………….. 55
9.4.2. Manual…………………..…………………………………………….…………… 56
9.5. Totalizing…………………………………………………………………….………… 57
9.6. Compounding……………..………………………………..……………….…………. 59
9.7. Check Weighing…………………………………………………………….…………. 61
9.7.1. Storing a Limit Set into the Scale’s Database…….…………………….…………. 62
9.8. Animal and Dynamic Weighing…...…………….……………………………………. 63
9.9. Display Hold…………………..……………………………………………………….. 64
9.10. SQC Process Control……………………………………..………………….…………..65
9.10.1. Storing a Limit Set into the Scale’s Database…………………………..…….…… 66
10. Using the Scale’s Alphabet for Data Entry………………………………………………… 67
11. Connecting and Using a Barcode Scanner with the Scale’s Database……………………... 68
11.1. Connecting the Scanner………………………………………………………………... 68
11.2. Assigning Barcodes to Samples or Limit Sets………………………..…………………. 68
11.3. Recalling a Previously Stored Sample or a Limit Set from the Database………………68
12. Technical Information……………………………………………………………………… 69
13. Common Error and Troubleshoots…………………….……...……………………………. 70
14. Maintenance…………………………..…………………………………..………………… 71
15. Accessories…………………………………………………….…………………………… 71
16. Replacement Parts……………………………………………….…………………………. 72
17. Limited Warranty…………….….…………………………………….…………………… 72