Torbal AGN100 - Manual (Page 44)

- 43 -
3. Once the stabilization indicator appears on the display, the container is ready to be tared. To tare the
container, press the “T” button. The display will show a dotted line which indicates the scale has
begun the taring process.
4. When finished taring, the balance will return to “Weighing Mode”. The display will indicate
0.000(0)g.
9.1.2. Clearing a Tare
1. To clear the tare, remove the tared object along with the NET weight from the pan. The scale will then
display a negative result.
2. To clear the tare, press the “T” button.
3. The display will show dashed lines indicating the tare is clearing.
4. When finished clearing the tare, the scale will return to Weighing Mode.