Torbal AGN100 - Manual (Page 28)

- 27 -
8.1.9. Display Hold
1. To configure the Display Hold Function, use the navigation keys to select “Display Hold” in “Mode
Setup” and press ENTER. The status and available Display Hold options will be displayed. If the
function is currently in use the status will be set to “ON”.
2. To select an operating mode use the navigation keys to select “Mode” and press ENTER. By default
Display Hold is set to “Auto” (Automatic). To operate Display Hold in Semi-Automatic or Manual
use the navigation keys to select a desired operating mode and press ENTER.
Display Hold Operating Modes
Automatic
Weighing Initialization : Automatic
Result Clearing : Automatic
Tare : Automatic
When set to Automatic, the scale will
automatically lock and hold the first stable
weight reading on the display. When the
weight is removed the scale will
automatically clear the result. Once the result
is cleared the scale will automatically tare and
prepare for next weighing.
Semi- Automatic
Weighing Initialization : Automatic
Result Clearing : Manual
Tare : Manual
When set to Semi-Automatic, the scale will
automatically lock and hold the first stable
weight reading on the display. When the
weight is removed it must be manually
cleared. Before starting the next weighing the
scale must be manually tared.
Manual
Weighing Initialization : Manual
Result Clearing : Manual
Tare : Manual
When set to Manually, the first stable weight
reading on the display must be locked
manually. When the weight is removed it
must be manually cleared. Before starting the
next weighing the scale must be manually
tared.