English, Using the mix function, Pouziti funkce mix – Panasonic NV-RX70EE User Manual

Page 75

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

■■■ y !

i

MIX'

^

i

D.MODE

I----

(.r

\

D.EFFECT

2,3,4

ENGLISH

Using the Mix Function

When this function is activated and you start recording a

new scene, first a still picture of the last recorded scene
appears. The moving picture of the new scene then
gradually appears superimposed over the still picture
which gradually disappears.

1

Press the [D.EFFECT] Button until the

[MIX] Indication Q appears in the

Finder.

•The Digital Effect Indication Lamp ] lights.

2

Press the Start/Stop Button to start

recording.

3

Press the Start/Stop Button to stop

recording the scene.

•The Movie Camera is in the Recording Pause

Mode

•The [MIX] Indication changes from Q o to

indicate that the last picture of the just recorded

scene is now being kept in the digital image

memory.

4

Press the Start/Stop Button to start

recording the next scene.

• First, the still picture (from the memory) appears

and it then gradually disappears while the moving

picture of the new scene gradually appears.

•All subsequent scene-to-scene transitions will be

recorded with this Mix Effect until you cancel the
Mix Function.

■ Cancelling the Mix Function

Press the [D.EFFECT] Button repeatedly until none of

the 8 Digital Effect Indications are displayed in the Finder.

• Performing Recording Check or pressing the

[VCR/CAMERA] Button does not erase the still

picture of the last recorded scene stored in the

digital image memory.

• However, turning the Movie Camera off or again

selecting a Digital Effect Mode except Wipe

erases the stored still picture.

CESKY

Pouziti funkce Mix

Jestiize je tato funkce aktivována a zacnete-l¡ natácení

nové scény, nejprve se objeví zastaveny obraz poslední
natocené scény. Poté se zacne pfes tentó obraz
postupné zobrazovat pohybující se obraz nové scény,

zatímco obraz pfedeslé scény pomalu mizi.

1

2

3

Stisknéte tlacítko [D.EFFECT], az se v

hiedácku objeví indikace [MIX] Q-

• Rozsvítí se indikátor digitálního efektu [® ].

Stisknéte tlacítko Start/Stop, abyste

zacali natácení.

Stisknéte tlacítko Start/Stop, abyste
ukoncili natácení scény.

• Video kamera je v rezimu natácecí pauzy.
• Indikace [MIX] se méní z ^ na @, aby

indikovala, ze poslední obraz právé natocené
scény je nyní ulozen v digitálni obrazové paméti.

4

Stisknéte tlacítko Start/Stop, abyste

zacali natácení dalsí scény.

•Nejprve se objeví zastaveny obraz (z paméti) a

poté se zacne pomalu ztrácet, zatímco se zacne
postupné zobrazovat pohybující se obraz nové
scény.

•Vsechny násiedující prechody ze scény do scény

budou natoceny s efektem Mix do té doby, nez

tuto funkci zrusíte.

■ Zrusení funkce Mix

Stisknéte opakované tlacítko [D.EFFECT] tak, aby v
hiedácku nesvítila ani jedna z 8 indikací digitálního

efektu.

• Provedení kontroly natocení ci stisknutí tlacítka

[VCR/CAMERA] nevymazává zastaveny obraz
poslední natocené scény, ktery je ulozen v

digitální obrazové paméti.

•Tentó zastaveny obraz je vsak z paméti

vymazán, jestiize vypnete Video kameru a nebo
zvolíte funkci digitálního efektu jinou, nez je
funkce Mix nebo Wipe.

78

Advertising