B&C Technologies SA Series Industrial User Manual
Page 10
SPECIFICATION/COMPONENT IDENTIFICATION
2-1
SECTION 2
SPECIFICATIONS/COMPONENT IDENTIFICATION
Delivery inspection
Upon delivery, visually inspect crate, protective cover, and unit for any visible shipping
damage. If the crate, protective cover, or unit are damaged or signs of possible damage are evident,
have the carrier note the condition on the shopping document before the shopping receipt is signed,
or advise the carrier of the conditions as soon as it is discovered.
Remove the crate and protective cover as soon after delivery as possible. If any damages
discovered upon removal of the crate and / or protective cover, advise the carrier and file a written
claim immediately.
Customer Service
If literature or replacement parts are required contact the source from whom the machine
was purchased or contact manufacturer.
A record of each machine is on file with the manufacturer. The serial number decal is
located at the rear of the machine. Always provide the machine’s serial number and model number
when ordering part or when seeking technical assistance.
NOTE:
Keep the manuals, installation instruction and the wiring diagrams which accompany
the machine in a safe place for ready reference. They have been included with the
machine at no charge. Additional copies are available at a nominal charge.