B&C Technologies SA Series Industrial - Manual (Page 26)

OPERATING INSTRUCTIONS
4-4
Advances to the next program step. During final spin, the remainder of the spin is
aborted. If pressed before starting a program, it allows the operator to begin the
program at any segment. During programming, skips to the next segment.
Confirms settings in creation and editing of wash programs. During operation, shows
the current segment or program number.
Deletes any selection or setting.
Terminates the current activity (operation or programming). While the machine is
powered but not executing a program, can be pressed with RESET to see the current
firmware version.
Starts execution of the currently selected wash program. Restarts a paused program.
When pressed with RESET, function codes can be entered to program and setup the
machine. See the quick reference list on the next page.
ADVAN
ENTER
DEL
RESET
STOP
START