Adjust the top thread tension – Kenmore 385. 19000 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjust the Top Thread Tension
• Choose the Correct Tension
For Straight Stitch:
The ideal straight stitch will have threads locked between
the two layers of fabric, as shown right (magnified to
show detail).
If you look at the top and bottom of the seam, notice
that there are no gaps. Each stitch is smooth and even.
When adjusting top thread tension, the higher the
number, the tighter the top thread tension.
Results depend on;
* stiffness and thickness of the fabric
* number of fabric layers
* type of stitch
(T) Needle thread (Top thread)
(2) Bobbin thread (Bottom thread)
(3) To loosen
(3) To tighten
• Tension is too tight
The bobbin thread shows through on the right side of
the fabric and it will feel bumpy.
Turn the dial upward to loosen the top thread tension.
(T) Needle thread
(2) Bobbin thread
d) To loosen
• Tension is too loose
The needle thread shows through on the wrong side of
the fabric and it will feci bumpy.
Turn the dial downward to tighten the top thread
tension.
(T) Needle thread
@ Bobbin thread
(
3
) To tighten
26