Kenmore 385. 19000 User Manual

Page 70

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Sew through all layers next to the fold. Stop just

before the zipper foot reaches the slider on the

zipper tape (about 5 cm [2 ’] }. Lower the needle

slightly into the fabric.

Raise the zipper foot and open the zipper,

l^wer the foot and stitch the remainder of the seam.

CD

Slider

(D 5 cm (2")

Close the zipper and spread the fabric flat with the

right side facing up. Baste the opened fabric and

zipper tape together.

d) Wrong side of upper fabric

(?) Basting stitch

(D

Right side of fabric

(6) Zipper tape

Zipper Sewing, cont'd

♦ Move the zipper foot to the left pin.

Guide the edge of the foot along the zipper teeth

and stitch through the garment and zipper tape.

Stop about 5 cm (2

")

from the top of the zipper.

Lower the needle slightly into the fabric, raise the

foot, remove the basting stitches along the zipper

opening.

Open the zipper to move the slider to behind the

zipper foot.

♦ Lower the foot and stitch the remainder of the

seam, making sure the fold is even.

54

Advertising