Kenmore 385. 19000 User Manual
Page 90
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
• Threading the Machine
For threading, refer to the description of conventional
sewing (see page 16 ).
Pass the needle thread through the hole in the
Embroidery Foot P in a downward direction.
Guide the thread around the thread holder from the
front side. (Leave 2 to 3 cm [1" J hanging.)
(D
Thread holder
d) Needle thread
(3) Bobbin thread
• To Attach the Embroidery Hoop to the Machine
Turn the knob so it is parallel with the hoop, and set it
on the carriage.
Attach the outer hoop by fitting the prongs into the
carriage, and turning the knob clockwise.
(T) Knob
(
2
) Carriage
74
Advertising