Kenmore 385. 19000 User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• Three Styles of Buttonhole
CO
Square Buttonhole
\2J
Roiindend Buttonhole
(D Keyhole Buttonhole
Sensor Buttonhole
• Preparation for Sewing
Attach the automatic buttor
groove on the holder attaches
lowering the presser foot.
© G roove
@ Pin
• To Sew
♦
The size of buttonhole is automatically set by
placing the button in the rear of the automatic
buttonhole foot.
The button holder on the foot takes a button
up to 25 mm
(1
") in diameter.
Alter the buttonhole width to match the
material and thread (see page 48).
Make a test buttonhole on an extra piece of the
fabric CO check your settings.
Use stabilizer on stretch fabrics,
(T) Double buttonhole key :
If you want to double the stitching on a buttonhole,
press this key before selecting a buttonhole pattern.
44