Snmp v3 profile – Comtrol ES9528-XT User Guide User Manual

Page 101

Advertising
background image

RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G

SNMP V3 Profile- 101

Configuration Using the Web Interface

SNMP V3 Profile

SNMP v3 can provide more security functions when you perform remote management through SNMP
protocol. It delivers SNMP information to the administrator with user authentication; all of data between the
ES9528 and the administrator are encrypted to ensure secure communication.

Note: You must Save the settings (

Page 124

), if you want to maintain these settings if the ES9528 is powered

off.

SNMP V3 Profile Page

User Name

SNMP v3 user name.

Security Level

Select the following levels of security: None, Authentication, and
Authentication and Privacy.

Auth Level

Select either MD5 (Message-Digest algorithm 5) or SHA (Secure
Hash Algorithm).

MD5 is a widely used cryptographic hash function with a 128-
bit hash value.

SHA functions refer to five Federal Information Processing
Standard-approved algorithms for computing a condensed
digital representation.

The ES9528 provides two user authentication protocols in MD5
and SHA. You need to configure SNMP v3 parameters for your
SNMP tool with the same authentication method.

Auth Password

Enter the SNMP v3 user authentication password.

DES Password

Enter the password for SNMP v3 user DES Encryption.

Add

Click to add an SNMP v3 user.

SNMP V3 Users

This table provides SNMP v3 user information.

Click Remove to remove a selected SNMP v3 user.

Click Reload to reload SNMP v3 user information.

Advertising
This manual is related to the following products: