Comtrol ES9528-XT User Guide - Manual (Page 104)

104 - MAC Filter (Port Security) RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G
Configuration Using the Web Interface
MAC Filter (Port Security)
The MAC Filter allows you to define the Access Control List for a specific MAC address or a group of MAC
addresses.
To access the options in the following web page, you must first enter the name of the MAC filter in the Name
text box in the Filter Set web page, highlight the MAC filter name, click Edit, and then this page appears.
Filter Type: MAC Standard/Extended
Filter ID/Name The name for this MAC Filter entry.
Action
Select Permit to permit traffic from specified sources or Deny to deny traffic from those
sources.
Source/
Destination
Address
Type the MAC address that you want to configure. The format is AABB.CCDD.EEFF. For
example: The Source to Destination is 00c0.4e33.0001 to 00c0.4e33.0022.
Source/
Destination
Wildcard
You can define a single host or a group of hosts
based on the wildcard. Some of the allowance
examples are shown in the following table.
Egress Port
Bind the MAC Filter rule to specific port.