Comtrol ES9528-XT User Guide - Manual (Page 184)

184 - Privileged EXEC Mode RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G
Complete CLI List
Privileged EXEC Mode
For information about accessing Privileged EXEC mode, see Privileged EXEC Mode on Page 184.
Switch# list
archive download-boot /overwrite tftp IPADDRESS IMAGE
archive download-sw /overwrite tftp IPADDRESS IMAGE
clear event-log
clear gvrp statistics [IFNAME]
clear lacp counters
clear mac-address-table dynamic
clear mac-address-table dynamic address MACADDR
clear mac-address-table dynamic interface IFNAME
clear mac-address-table dynamic vlan VLANID
clear redundant-ring statistics [0-31]
clear rmon statistics [IFNAME]
clear spanning-tree counters
clear spanning-tree counters interafce IFNAME
clear spanning-tree detected-protocols
clear spanning-tree detected-protocols interface IFNAME
clock set TIME MONTH DAY YEAR
configure terminal
copy running-config startup-config
copy startup-config tftp: URL
copy tftp: URL (ssh-dss|ssh-rsa)
copy tftp: URL ssl-cert
copy tftp: URL startup-config
debug acl <1-7> <0-1024> <0-1024> <0-24>
debug dot1x all
debug dot1x errors
debug dot1x events
debug dot1x packets
debug dot1x registry
debug dot1x state-machine
debug gmrp
debug gvrp (all|rcv|tx|gvrp_event|vlan_event)
debug ip dhcp (all|event)
debug ip igmp
debug ip igmp snooping (all|group|management|router|timer)
debug l2 mac (all|trace|debug)
debug lacp (all|event|fsm|misc|packet)
debug meminfo
debug mirror (enable|disable)
debug proto pdu
debug ptpd all
debug qos
debug rate-limit
debug redundant-ring (pdu|trace|debug|rapid-dual-homing|rstp|multi-ring|all) <0-
31>
debug snmp
debug spanning-tree (all|bpdu|config|events|general|root|sync|tc)
debug sw-rate-limit get <0-64>
debug sw-rate-limit set <0-64> <0-1000>
debug sw-rate-limit set <0-64> off