Comtrol ES9528-XT User Guide - Manual (Page 108)

108 - Filter Attach RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G
Configuration Using the Web Interface
Note: The mask is a wildcard mask: the high-order bits of the mask that are binary zeros determine how many
corresponding high-order bits in the IP address are significant. The selected action applies to any source
address with these high-order bits.
Filter Attach
Initially, the interfaces associated with the selected device have no Filter attached to them. To attach or
detach a Filter: select the row for the interface to which you want to attach a Filter or from which you want to
detach a Filter.
Click to reload the filter table.
Click the Apply button to apply the Filter configurations.
Note: You must Save the settings ( Page 124 ), if you want to maintain these settings if the ES9528 is powered
off.
Wildcard Bit
Number of
Allowances
Note
Any 11111111.11111111 All
All IP addresses or a mask
255.255.255.255
Host 0.0.0.0 1 Only the source or destination
0.0.0.3 0.0.0.0.(00000011) 3
0.0.0.7 0.0.0.0.(00000111) 7
0000.0000.000F 0.0.0.0.(11111111) 15
....