Vlan configuration – Comtrol ES9528-XT User Guide User Manual

Page 85

Advertising
background image

RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G

VLAN Configuration - 85

Configuration Using the Web Interface

VLAN Configuration

Use this page to assign the Management VLAN, create the static VLAN, and assign the Egress rule for the
member ports of the VLAN.

Ingress
Filtering

Ingress filtering instructs the VLAN engine to filter out undesired traffic on a port.

When you Enable Ingress Filtering, the port checks whether the incoming frames
belong to the VLAN they claimed or not. The port then determines if the frames can
be processed or not. For example, if a tagged frame from TEST VLAN is received,
and Ingress Filtering is enabled, the ES9528 determines if the port is on the TEST
VLAN
’s Egress list. If it is, the frame can be processed. If it is not, the frame is
dropped.

When you select Disable, the port accepts all incoming frames regardless of its VLAN
classification. This control does not affect VLAN independent BPDU frames, such as
Super Ring, STP, GVRP and LACP. It does affect VLAN dependent BPDU frames,
such as GMRP.

Apply

Click Apply to apply the settings.

Note: You must Save the settings (

Page 124

), if you want to maintain these settings if

the ES9528 is powered off.

VLAN Port Configuration Page (Continued)

Advertising
This manual is related to the following products: