Syslog configuration – Comtrol ES9528-XT User Guide User Manual
Page 114
114 - SysLog Configuration
RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G
Configuration Using the Web Interface
SysLog Configuration
The System Log provides the system administrator ES9528 events history. There are two System Log modes
provided by the ES9528, Local mode and Remote mode.
When enabling Local or Both modes, you can monitor the system logs in the Monitor and Diag /Event Log
page.
Port Event
Warning Event is sent when…..
Apply
Click Apply to apply the settings.
Note: You must Save the settings (
), if you want to maintain these
settings if the ES9528 is powered off.
Warning - SysLog Configuration Page
Syslog Mode
There are two system logs available:
•
Local Mode: The ES9528 prints the events that have been selected in the
Event Selection page to the System Log table of the ES9528. You can
monitor the system logs in the Monitor and Diag /Event Log page.
•
Remote Mode: Assign the IP address of the System Log server. The ES9528
sends the events that occurred in the selected in Event Selection page to
System Log server that you assign.
•
Both: This enables both Local and Remote modes.
Remote IP Address
The IP address of the System log server.
Apply
Click Apply to apply the settings.
Note: You must Save the settings (
), if you want to maintain these
settings if the ES9528 is powered off.