Comtrol ES9528-XT User Guide - Manual (Page 34)

34 - Secure Web User Interface RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G
Configuration Using the Web User Interface
4. Enter the user name and the password and click OK. The default user name and password are both
admin.
The Welcome page of the web management interface then appears.
5. If you have not done so, you can change the ES9528 IP address to meet your network environment.
a. Double-click Basic Setting.
b. Click IP Configuration.
- To use static addressing, enter a valid IP address, subnet mask and default gateway.
- To use DHCP, click Enable in the DHCP Client drop list.
c. Click Apply.
You can use the Feature Overview on Page 35 to locate other features that you may want to configure.