Comtrol ES9528-XT User Guide - Manual (Page 31)

RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G Web User Interface - 31
Configuration Using the Web User Interface
4. Enter the user name, the password, and click OK. The
default user name and password are both admin.
The Welcome page of the web management interface
then appears.
5. If you have not done so, you can change the ES9528 IP address to meet your network environment.
a. Double-click Basic Setting.
b. Click IP Configuration.
To use static addressing, enter a valid IP add dress, subnet mask and default gateway.
To use DHCP, click Enable in the DHCP Client drop list.
c. Click Apply.
You can use the Feature Overview on Page 35 to locate other features that you may want to configure.