Comtrol ES9528-XT User Guide - Manual (Page 113)

RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G Warning - 113
Configuration Using the Web Interface
Warning
The ES9528 provides several types of warning features for you to remotely monitor the status of the attached
devices or changes in your network. The features include System Log and SMTP Email Alert.
The following web pages are included in this group:
• Event Selection on Page 113
• SysLog Configuration on Page 114
• SMTP Configuration on Page 115
Optionally, you can use the CLI for configuration, see Warnings (CLI) on Page 176.
Event Selection
Event Types can be divided into two basic groups: System Events and Port Events. System Events are related
to the overall function of the switch, whereas Port Events are related to the activity of specific ports.
System Event Warning is sent when….
Device Cold Start Power is cut off and then reconnected.
Device Warm Start Reboot the device by CLI or web user interface.
Authentication failure An incorrect password or SNMP Community String is entered.
Time Synchronize Failure Accessing the NTP Server is failing.
Super Ring Topology
Changes
Master of Super Ring has changed or backup path is activated.
Port Event Warning is sent when…..
Link-Up The port is connected to another device.
Link-Down
The port is disconnected. For example, the cable is pulled out or the opposing
devices is down.
Both The link status changed.