Comtrol ES9528-XT User Guide - Manual (Page 132)

132 - Accessing the Options for a Command RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G
Configuration Using the Command Line Interface (CLI)
4. Type show ip route and press the Enter key to view the IP routing tables for the ES9528.
5. If you type list and press Enter, the ES9528 provides you information about all of the commands and
options for a mode. The following example shows the available commands and their options for User
EXEC mode.
Switch> show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF,
B - BGP, > - selected route, * - FIB route
S>* 0.0.0.0/0 [1/0] via 192.168.0.254, vlan1
C>* 127.0.0.0/8 is directly connected, lo
C>* 192.168.0.0/16 is directly connected, vlan1
ES9528> list
enable
exit
list
ping A.B.C.D
ping WORD
ping X:X::X:X
quit
show arp
show gvrp statistics [IFNAME]
show ip forwarding
show ip route
show ip route A.B.C.D
show ip route A.B.C.D/M
show ip route supernets-only
show version
telnet WORD
telnet WORD PORT
traceroute WORD